Small Fast & Quick Clamping Vise GHEXA-CUT-ACC-003
| Parameter | Specification |
|---|---|
| Model | GHEXA-CUT-ACC-003 |
| Applicable Machines | GHEXA-CUT-EQP-AUTO-005 / GHEXA-CUT-EQP-MAN-006 (and compatible small-capacity sectioners) |
| Primary Application | Miniature & small sample clamping |
| Jaw Dimensions (W × H) | 30 × 30 mm |
| Jaw Opening / Travel Range | 35 mm |
| Mounting Type | Threaded T-slot blocks (M6) |
| Left-Side Variant Order No. | 23.01.260S200L |
| Right-Side Variant Order No. | 23.01.270S200R |
| Material | Precision-machined hardened steel with corrosion-resistant finish |
| Clamping Mechanism | Fast-action quick-release with high holding force for small parts |
| Compatibility Note | Optimized for compact chambers and precise alignment on G-Hexa small-sample cutting systems |
Payment. Secure payments via Bank Transfer, UPI, Credit/Debit Card, and approved Institutional PO. Flexible terms available for bulk and research orders.
Quality Assurance. All products are quality-checked, performance-validated, and sourced from verified manufacturers to ensure reliability and compliance with laboratory standards.
Description
GHEXA-CUT-ACC-003 Small Fast & Quick Clamping Vise
Product Short Description The GHEXA-CUT-ACC-003 Small Fast & Quick Clamping Vise is a compact, high-precision quick-action vise designed for secure and ultra-fast clamping of miniature and small samples during abrasive sectioning. With slim 30 × 30 mm jaws and a 35 mm travel range, it provides firm, repeatable grip on tiny specimens, thin sections, small coupons, wires, and delicate components. Featuring M6 threaded T-slot blocks for rapid mounting, this vise minimizes setup time and maximizes efficiency on compatible G-Hexa automatic and manual cutting machines—perfect for labs handling high volumes of small or precision samples.
Specifications
| Parameter | Specification |
|---|---|
| Model | GHEXA-CUT-ACC-003 |
| Applicable Machines | GHEXA-CUT-EQP-AUTO-005 / GHEXA-CUT-EQP-MAN-006 (and compatible small-capacity sectioners) |
| Primary Application | Miniature & small sample clamping |
| Jaw Dimensions (W × H) | 30 × 30 mm |
| Jaw Opening / Travel Range | 35 mm |
| Mounting Type | Threaded T-slot blocks (M6) |
| Left-Side Variant Order No. | 23.01.260S200L |
| Right-Side Variant Order No. | 23.01.270S200R |
| Material | Precision-machined hardened steel with corrosion-resistant finish |
| Clamping Mechanism | Fast-action quick-release with high holding force for small parts |
| Compatibility Note | Optimized for compact chambers and precise alignment on G-Hexa small-sample cutting systems |
Key Applications & Uses
- Secure fixturing of miniature metallographic samples, test coupons, thin foils, wires, small fasteners, and micro-components during abrasive cutting
- Rapid sample loading for high-throughput preparation of small parts in electronics, precision engineering, jewelry, and micro-materials labs
- Clamping delicate or fragile specimens such as PCB sections, small forgings, dental implants, biomedical devices, and research prototypes
- Enabling accurate, repeatable positioning for serial sectioning, multi-position cuts, or angled sectioning of tiny workpieces
- Supporting microstructure analysis, failure examination, and quality control workflows requiring minimal deformation on small-scale samples
- Ideal for university research labs, pharma R&D, biotech sample prep, and industrial facilities processing miniature or precision-engineered components
Why Choose from G-Hexa?
- Ultra-Compact & Fast — Slim 30 × 30 mm jaws with quick-release mechanism enable lightning-fast clamping and unclamping of small samples, dramatically reducing handling time in busy labs.
- Precision Grip for Tiny Parts — Delivers strong, slip-free hold on miniature specimens without crushing or marking delicate surfaces—essential for accurate downstream analysis.
- Direct Machine Compatibility — M6 threaded T-slot blocks allow instant, secure installation on GHEXA-CUT-EQP-AUTO-005 and GHEXA-CUT-EQP-MAN-006—no tools or adapters required.
- Durable & Reliable — Built from hardened steel with protective coating to resist coolant exposure, wear, and frequent use while preserving jaw alignment and performance.
- Left & Right Options — Mirrored left-side and right-side variants support flexible setups, dual-vise configurations, or optimal sample orientation on compact cutting tables.
- Lab-Tailored Ecosystem — Part of G-Hexa’s complete metallographic solution—backed by fast nationwide delivery, expert support, and seamless integration with G-Hexa cutters and consumables for researchers and industrial users across India.
Frequently Asked Questions (FAQs)
Q: Which G-Hexa machines is the GHEXA-CUT-ACC-003 vise compatible with? A: It is designed for the GHEXA-CUT-EQP-AUTO-005 automatic and GHEXA-CUT-EQP-MAN-006 manual abrasive sectioning machines, plus other compatible small-capacity models.
Q: What sample sizes does this small vise handle best? A: The 30 × 30 mm jaws and 35 mm opening are optimized for miniature and small samples, including thin sections, wires, coupons, micro-components, and parts up to approximately 30 mm in width/height.
Q: What is the purpose of the left-side and right-side variants? A: The left (23.01.260S200L) and right (23.01.270S200R) versions are mirrored configurations to match different mounting positions, sample orientations, or dual-vise arrangements on the machine table.
Q: How quickly can I mount or change samples with this vise? A: The fast-action quick-release design allows sample insertion, clamping, and removal in seconds—ideal for high-volume workflows with frequent sample changes.
Q: Will this vise damage very soft or fragile small samples? A: It provides controlled, firm clamping; for extremely soft, coated, or brittle materials, use protective jaw liners or thin padding—G-Hexa can advise on suitable accessories.
Q: Can this vise be used for both automatic and manual cutting? A: Yes—it offers stable, precise holding in both programmed automatic modes and manual operation, ensuring consistent cut quality across applications.
Q: Is it possible to use two vises at once on the same machine? A: Yes—pairing left and right variants enables simultaneous clamping of multiple small samples or enhanced support for elongated tiny workpieces within the machine’s capacity.
Reviews
There are no reviews yet.